Pros And Cons Of Spacers To Increase Ground Clearance On Cars

Unfortunately, the quality of roads in many Russian cities, to put it mildly, leaves much to be desired. And if in large metropolitan areas the situation is gradually changing for the better, then most regions cannot yet boast of this. As a result, even the owners of domestic cars often think about the need to install spacers for VAZ to increase ground clearance.

Such improvements will slightly raise the car body, which can significantly reduce the risk of damaging the bumpers and sills, as well as stop scratching the bottom on especially harsh sections of the path with deep pits and ruts. At the same time, the use of spacers is also available for owners of a large number of foreign cars.

Spacers to increase ground clearance

Not everyone can afford SUVs or high crossovers, and most imported cars are not at all particularly well adapted to Russian road conditions, especially against the background of Lada models, which already have a decent ground clearance from the factory.

So if the owner of a low car has to regularly drive on roads with pits, potholes, ruts, mud, puddles and other “delights”, then in this case it is definitely worth thinking about installing special spacers. Note that the kits of the latter are available for almost any type of suspension, both for the rear and for the front.

Pros and cons of spacers to increase ground clearance

+ Pros

  • Low cost
  • Easy to install
  • Available for a wide range of vehicles
  • Can be used with sagging springs
– Minuses

  • You may void your warranty if you bet on a new car
  • The center of gravity rises
  • Strengthening the load on shock absorbers and reducing their resource
  • Most likely you will need to re-do the camber / toe

One of the key tasks of increasing the clearance of a car using spacers is to improve cross-country ability, but their use can also come in handy if you often have to carry something heavy in the trunk or several people in the cabin, and possibly both at the same time. So the use of spacers will help prevent the rear suspension from sinking too much.

Spacers to increase ground clearance

Among the disadvantages of spacers, the deterioration of handling is often called – a raised car becomes more roll. In general, this is the case, therefore, after installing the latter, you should choose the appropriate driving style. Also, a lot depends on the quality of the installation, so if you have doubts about your own abilities, then it is better to entrust this procedure to specialists of a trusted service.

What are the spacers

By installation type

  • Under the racks
  • Under shock absorbers
  • Under the springs

By material of manufacture

  • ABS plastic
  • Polyurethane
  • Rubber
  • Aluminum
  • Steel

Of course, the spacers also differ in height – the most common sizes are 20, 30, 40 millimeters, but in some cases more specific parameters can be selected. As for the material of manufacture, the most common now are polyurethane and ABS plastic, which, unlike metal, do not corrode.

This material was prepared with the support of – manufacturer of spacers to increase vehicle clearance. A wide range of products is presented on the company’s website, while delivery is carried out all over the world. An online consultant is ready to answer any questions of interest.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *